M&K Sound MPS1620P Studio Monitor

Studio Hi-Fi
Studio Hi-Fi
Studio Hi-Fi
Studio Hi-Fi
M&K SOUND

M&K Sound MPS1620P Studio Monitor

Overview

  • The MPS 1620P studio monitor feature a long stroke 6.5” driver and a low compression 1” dome tweeter to provide impressive sound impact for high resolution “sound productions”.
  • The dual channel power amplifiers drive the bass-midrange and high frequency sections with great precision and full control of signal dynamics.
  • The MPS1620P can operate both as a sealed or a ported loudspeaker due to the removeable “port plug system” at the rear side of speaker.
  • When operating with subwoofer, the choice of sealed box configuration and filter set to “normal” will provide the classic M&K Sound sub/sat crossover configuration, while when using the MPS1620P as a stand-alone monitor, the ported configuration with filter set to “full-range” will extend bass response and provider precise “broad band” response for near field monitor applications.
  • MPS1620P is a flexible high precision studio monitor to use for reference recordings, editing, processing, and master mixing for music and movie productions.

Specifications

  • Sound
  • Amplifier power bass-midrange: 100watt RMS/200watt peak
  • Amplifier power high frequency: 50watt RMS/100watt peak
  • Bass/Midrange: 1 x 6,5” polypropylene woofer
  • High frequency Drivers: 1 x 1” soft dome tweeter
  • Frequency Response:
  • Sealed/normal setting 80-22KHz +/-2dB / (wall or console loaded) 45-22Khz +/-2dB
  • Ported/normal setting 45-22KHz +/-2dB
  • Ported/full range setting / (wall or console loaded) 35-22Khz +/-2dB
  • Total Harmonic distortion: 0,025% into 8 ohms LF channel / 0.025% into 4 ohms HF channel
  • Signal to noise ratio: 100dB
  • AC power consumption: Standby/Average/Max (15W, 30W, 240W)
  • AC line voltage: 115VAC/60Hz 2A – 230VAC/50Hz 1A
  • Input impedance: unbalanced 11kohm / balanced 22Kohm
  • Input sensitivity unbalanced 100mV 88dB 1m / balanced 200mV 88dB 1m
  • Max output level: 106dB/100Hz
  • Max input: 24dBu balanced
  • High pass filter: Fixed 80 Hz (24dB)
  • Dimensions
  • Dimensions HxWxD: 321 x 213 x 297 mm
  • Weight: 9.2 kg
  • Colors
  • Finish: Black satin

Reviews

Information

Подобни продукти

M&K SOUND V10+ SUBWOOFER

M&K Sound V10+ Subwoofer

V10+ предоставя възможност на потребителите да се насладят на легендарния дълбок и точен бас с който M&K Sound е световно известен в компактен и достъпен формат.

M&K SOUND X15+ THX SUBWOOFER

M&K Sound X15+ THX Dominus Subwoofer

X15+ е първият 15-инчов push-pull субуфер на компанията, който е клас THX® Dominus Certification, независимо дали се използва като единичен субуфер или като двойка.

M&K Sound S150 MkII

Тонколоните M&K Sound S150 MkII можете да намерите при нас в Black Satin финиш.