SUPRA LoRad Mains Block MD06 EU/SP SPC

SUPRA

SUPRA LoRad Mains Block MD06 EU/SP SPC

SUPRA Mains Power Distribution Blocks with optional filter, switch and surge protection – EU markets
Екраниран разклонител от алуминий със защити и окабеляване от посребрена мед.

LoRad Shielded Mains Blocks in Aluminium – Silver plated internal wiring
The mains blocks are fully shielded from radiated electric fields by means of their aluminium chassis. The conductive chassis drains the interference down to ground. It has to be connected to an earthed socket with an earthed mains cable, in order to work properly. For a useful degree of shielding and immunity, the mains block should be combined and employed with SUPRA LoRad shielded mains cables.

SUPRA NIF Transient Filter
All models are equipped with SUPRA NIF (Non-Intrusive Filtering), a mild transient filter which will not influence the transient properties of the equipment. SUPRA NIF is developed by Ben Duncan Research in England.

3-Way Surge Protection
The SP-models, i.e MD06-BS/SP, MD06-EU/SP and MD06-US/SP, are all equipped with SUPRA’s surge protection device which protects all three ways: Live to Earth, Neutral to Earth and Live to Neutral. Many other surge protectors are only Live to Neutral, and do not protect against field surges by proximate lightning. Lightning is always referred to earth.
For a correct and safe 3-way surge protection, the mains block has to be connected to an earthed wall socket.

MD06-EU/SP SPC Black Mk 3.1
6 EU sockets, Schuko.
Input connector: IEC-320
10 Amp Fuse
NIF transient filter
3-way Surge Protection.
Made in Sweden!

For a correct and safe 3-way surge protection, the mains block has to be connected to an earthed wall socket.

Technical Data

Standard: European Standards, except UK, Ireland, Belgium and Italy
Maximal current: 10 Ampere
Switch current capacity: Optional 16A (high in-rush current capacity) Ampere
Nominal (maximal) voltage: 230 (250) Volt
Maximal power load: 2.3 kW
Mains frequency: 50 Hz
Mains inlet socket: International standard IEC-320 for 10 ampere
Internal cable area: 2.5 mm2
Outlet sockets: 2 to 6 (1 unfiltered, the rest NIF filtered, all of them SP protected) pieces
Fuse: 10 Ampere
Filter (level): Non-Intrusive Filtering (up to 40) dB
Surge protection (SP): L to 0, L to Ground and 0 to Ground
Included accessories: Brackets for wall mount and rubber feet as floor stands